Ardcore Choppers Blacked Out XS
Ok boys and girls here’s the newest XS to roll out of the Ardcore shop. The bike is on its way down to Tejas. That is Spanish for Texas. This ride was built for a guy who goes by the name of David Sweeney.
Here are some specs on this Yamaha xs650: Ardcore 180mm frame, Ardcore off set sprocket ,top fools exhaust set up and a -2 springer. The rear sports a 18 180 tire. This bike runs a boyer ignition. The IGNITION IS DESIGNED TO REPLACE YOUR OLD STYLE. The ignition system improves starts, idle and revs through the rpm range.
The guys at THOMAS RACING hooked up the engine. Thomas racing is out of Indiana and they specialize in XS650 motors and other high-performance racing products. After they’re done building the XS power plant they test run it before it leaves the shop.
The motor is 100% rebuild and has a welded crank a valid job and bead blasted heads and cases. The motors really worked over with new clutch fibers, new cam chain, new gaskets and seals and other good stuff. Sounds like a badass engine right?
Download this pic as a Screensaver. Click Here!
The tank and fenders have been paint with SEM Hot Rod black and the frame has been powder coated. Nate says “The customer wanted it blacked out so that what we did..”
Is their anything else interesting that we wouldn’t notice from looking at the pics?
Nate- hmmm…The bike is running one of our offset sprocket to accommodate the wider rear wheel, also is running our chain tensioner..
Anything else you’d like to add?
Nate- Buy a gun.. _Nate
Ardcore Choppers
sales@ardcorechoppers.com
ARDCORE CHOPPERS, LLC
10594 E 59TH ST
INDIANAPOLIS IN 46236-8333
Enjoy
Nate- I should also note that the photos where taken by Greg “the mayor” Andrews http://flickr.com/photos/gregthemayor the Model is Erica T.
Looks great. We share the same style.
Keep up the good work guys!!!!!!!!
What size rim and what brand tire is that on the front? Is it the same set up as the wizard sleeze? And this bike is so slick and simple that i want one now….wait may be i should send the project i have in the garage to you guys..hmmm….wonder what the wife will say?
Bitchin’ bike…is “negro” politically correct?
@shotcaller- “negro” politically correct?- I don’t know man. I’m not the one who built or named the bike so…. I hope I’m able to get my bike to turn out sooooo clean and kickass. How is your bike coming?
‘el perro negro’ is spanish for ‘the black dog’
all of the wait / load time for the vid and I don’t even get to hear it run…..at least there is a good looking woman to watch…the bike aint bad either.
Lovin this ride. Easily one of the cleanest, baddest and simplest chops I’ve ever seen. Those Ardcore guys really know what they’re doin! Very simple. Very cool.
This bike is pretty clean. I really like the front end. I wish it had mid controls
Every time I see a completed Ardcore bike it remotivates me on mine. Keep em comin John and Nate. Ted, Mine is almost ready to come down for paint. I’ll send you some pics soon.
next build my tins are goin to nate, without a doubt….
where can I get those bars?
I dig the song for the vid who is it?
God I love black bikes with a redhead around it!
Thanks for the comments guys..
@speedingDoug,yeah I prefer mids also but the customer wanted forwards..
@Nick email us.
@Jesus, The band is called ZzZ they are friends of mine from Holland. You can find them on the interwebs..
so rad.
great bike! crazy hot chick!
just an amazing post all around!
Well even with the forward controls, its still rad. Where did that springer come from?
I like that rear wheel what is it off of?
The bike is amazing guys great work im sure customer is gonna be stoked. Once again gorgeous!!
i also would like to know what kind of bars that its running, cheers.
Very awesome bike! keep up the good work Gents
Looks good, do you guys sell your offset sprockets?
Nice. Put together well. I mean the girl lol.
i like that style of bikes slick and basic!
Does anyone know approximately how much it would cost to have one of these built? Do I have to supply the donor bike?
Nice bike – but thats not unusual for Ardcore bikes.
Nice Erica too
not to be a pain but I sent a couple emails about the bars and no response..:(
Wicket littke black bike!
pretty cool but fong bros do better.
luke, I don’t think you really know what you’re talking about. The fong bros have good style but ardcore is doing things you wouldn’t even notice. A ardcore bike is like a completely new ride.
Those bars look like the same ones i’m using on my build, BILTWELL FRISCO’S
Nice bike. I Want to make the rear wheel on mine the same. Where did you get the wheel? What else is needed to make the back wheel the same as yours? Thanks!
@Nick- These clowns won’t respond to your emails. They’re customer service is the worst I’ve ever dealt with. You’d be much better off getting bars from Front Street Cycle, paint from Blue Moon Customs and parts from Elswick Cycles. Blue Moons paint is so much better than nates. Theres no comparison.
Americanbarber82
You wouldn’t by chance be the guy that called on Mon/Tue of last week about pipes and were told to get your order in ASAP as we had a batch we were building and waited until 7:30PM FRIDAY NIGHT to order them are ya?. You called on Sat. and we told you we would try to get them done to ship on Monday. Now your pissed we couldn’t get them done in 4 hours on Mon. to make the UPS truck and they went out on Tue. morning. Again forgetting you were told to get your order in ASAP and you waited until 7:30PM FRIDAY NIGHT. I checked your emails and everyone you sent was answered from March. As for our paint have even seen any of our paint? See boys and girls this is the kind of stuff we deal with DAILY.
HEY? ?QUESTION FOR ARDCORE CHOPPERS I BOUGHT A 76′ YAMAHA XS650 THAT HAS HAD AN ADVANCED MECHANISM PUT ON IT. NOT SURE WHAT BRAND EITHER. AND STILL HAS THE 2 OLD STOCK COILS. WHAT COILS SHOULD I GET TO REPLACE. I WAS LOOKIN AT THE 2 TO 1 ONES ON MIKESXS. CAUSE ONE CYLINDER ISNT FIRING BUT HAS GOOD COMPRESSION, AND I THINK IT DIDNT HAVE ANY SPARK ON THAT SAME SIDE. CANT REMEMBER IF IT WAS FIRING WHEN I FIRST GOT IT CAUSE IT SAT FOR FOUR YEARS PRYOR TO BUYING IT. MAYBE SOME TIPS WOULD HELP THANKS. YOUR GUYS’S BIKES R ARDCORE
God I love that Springer Front End!!!
Big Huge Gigantic THANX To ARDCORE – And Mike, And TED, and TC Bros And All Others Keeping These xs650′s A FORCE TO BE RECKONNED WITH…..To Hans of Holland,- To the Fong Bros…
And of course to All Of The Thugs busting thier Knuckles In thier Driveways, Basements and Home Workshops….
So COOL to be able to buy ANYTHING I WANT for my 40 year old Yamaha…..BADDASS!!!!!!!!!!!!!!!!
Adam,
Call the shop or email and we will see if we can help you out.
Badass bike! Is that an Ardcore springer?
Oh and @AmericanBarber82- I emailed Ardcore about bobber frame and front end and got email back in a matter of hours, at night! douche. stay off boards like this with bullshit.
Again badass build. front controls belong on a OCC bike tho!
@ Mark – Thank YOU! Any time I see some goofball posting some bullshit I would love it if someone like yourself puts them in their place.
I don’t want this site polluted with negative crap.
Love the bike. Always putting out sick bikes. Nate and John at Ardcore are some stand up dudes with a great business. Great service. Good dudes. Always willing to help…